The eGen is a portable power generator that replaces fuel combustion generators to provide power for trading, leisure or emergency activities. No fuel required, unbelievably low operating cost.
The eGen can be customizable if needed in terms of backup time, sine wave form, etc.
Due to the weight of this product, please write to us for shipping cost or delivery cost. For large orders this cost will be covered by us.
eGen 1600 Backup Power (Series 9)
Backup time on a 1000W load:
4 hours (Series 7) or 5 hours and 30 minutes (Series 9)
Sale: 10% discount
SPECIFICATIONS |
|
| Input | |
| Voltage (AC) | 220-250 V |
| Frequency | 50 Hz |
| Line Low Transfer | 120 Vac + 2% |
| Line Low Return | 130 Vac + 2% |
| Line High Transfer | 275 Vac + 2% |
| Line High Return | 260 Vac + 2% |
| Output | |
| Voltage (AC) | 220 Vac (230 V or 240 V re-settable via LCD panel) |
| Voltage Regulation (Batt. Mode) | < 3% RMS for entire battery voltage range |
| Frequency | 50 Hz + 0.1Hz |
| Waveform | Pure Sine Wave |
| Efficiency | 80% |
| Overload Protection (Line Mode) | Circuit Breaker |
| Overload Protection (Batt. Mode) | 110% ~ 150% for 30 sec., > 150% for 200ms |
| Battery | |
| Battery Quantity (Ah Rating) | 4 units (75Ah or 90Ah) |
| Battery Voltage | 24Vdc |
| Status Indicators | |
| Battery Mode | Beeping every 4 seconds |
| Low Battery | Beeping every second |
| UPS Fault | Beeping continuously |
| Overload | Beeping twice per second |
| LCD Display | UPS status, I/P & O/P, Voltage frequency, Load percentage |
| LED Display | Battery voltage & percentage, Charge current, Temperature, Model |
| Output Short Protection | Yes |
| UPS changeover (Typical) | 8ms |
| Operation Temperature | 0-40°C |
| Weight (Dependant on batteries used) | 115kg (75Ah) / 135kg (90Ah) |
| Relative Humidity | 0-95% non-condensing |
| Noise level | < 55dBA at 1m |
| Dimensions (mm) | 305W x 835H x 450L |
LOAD (W) |
BACKUP DURATION 75Ah/90Ah |
| 300 | 12 / 13 hours |
| 500 | 8 / 10 hours |
| 700 | 6 / 7:30 hours |
| 1000 | 4 / 5:30 hours |
Loading...

